New dado insert for my Skil 3410 table saw
***UPDATE 10-23-20*** Thank you to Kiel Herman who posted a current order link in the comments. CLICK HERE to order
***UPDATE 10-23-20*** Thank you to Kiel Herman who posted a current order link in the comments. CLICK HERE to order
I recently wrote an post on making a zero clearance insert plate for my table saw. The main reason that
I made the benchtop out of 2 pieces of 1/2″ plywood laminated together, cut the tray bottom to size and got
I made the benchtop out of 2 pieces of 1/2″ plywood laminated together, cut the tray bottom to size and got
The plans called for making the benchtop out of 3/4″ plywood. I’ve had this sheet of 1/2″ plywood in my
The plans called for making the benchtop out of 3/4″ plywood. I’ve had this sheet of 1/2″ plywood in my
I had put off working on the New Yankee workbench because I didn’t have an insert for my table saw
I was able to get quite a bit of work done on the bench this weekend. On Saturday I fixed
I was able to get quite a bit of work done on the bench this weekend. On Saturday I fixed
I started the workbench build back at the beginning of the year by cutting all the 2×4’s down to length.