I made the bench feet with some scrap 2×4 that I had leftover.  This turned out to be a bad

I cut the slot out of the benchtop for the dogs and tailstock.  What a giant pain in the rear? 

I got the benchtop all cut down to size and screwed together.  I also cut the dado’s and grooves for

I recently wrote an post on making a zero clearance insert plate for my table saw.  The main reason that

I made the benchtop out of 2 pieces of 1/2″ plywood laminated together, cut the tray bottom to size and got

The plans called for making the benchtop out of 3/4″ plywood.  I’ve had this sheet of 1/2″ plywood in my

I had put off working on the New Yankee workbench because I didn’t have an insert for my table saw

I was able to get quite a bit of work done on the bench this weekend.  On Saturday I fixed

I started the workbench build back at the beginning of the year by cutting all the 2×4’s down to length.