New Yankee workbench update.
I got the benchtop all cut down to size and screwed together. I also cut the dado’s and grooves for
New Yankee workbench update.
I got the benchtop all cut down to size and screwed together. I also cut the dado’s and grooves for
New dado insert for my Skil 3410 table saw
***UPDATE 10-23-20*** Thank you to Kiel Herman who posted a current order link in the comments. CLICK HERE to order
New dado insert for my Skil 3410 table saw
I recently wrote an post on making a zero clearance insert plate for my table saw. The main reason that
New Yankee Workshop Workbench update – benchtop & tray parts
I made the benchtop out of 2 pieces of 1/2″ plywood laminated together, cut the tray bottom to size and got
New Yankee Workshop Workbench update – benchtop & tray parts
I made the benchtop out of 2 pieces of 1/2″ plywood laminated together, cut the tray bottom to size and got
New Yankee Workshop Workbench update – cutting the plywood benchtop
The plans called for making the benchtop out of 3/4″ plywood. I’ve had this sheet of 1/2″ plywood in my
New Yankee Workshop Workbench update – cutting the plywood benchtop
The plans called for making the benchtop out of 3/4″ plywood. I’ve had this sheet of 1/2″ plywood in my
Zero clearance table saw insert
I had put off working on the New Yankee workbench because I didn’t have an insert for my table saw
New Yankee Workshop workbench update
I was able to get quite a bit of work done on the bench this weekend. On Saturday I fixed