Shop update #321 (1-3-24)

The last of overhead storage shelves are done!

This is where 2 more sets of 90″ shelves are going.

I installed the horizontal braces on the wall first.

I then installed the braces on the ceiling and screwed the vertical 2×4’s into them.

I then screwed the last set of horizontal strip into the bottoms of the 2×4’s.

I had 1 piece of OSB cut to width but not length.  It was also hitting one of the vertical 2×4’s from the last shelf.  I cut them down to length and notched out the 1 shelf for the 2×4.

All finished and ready to load up!