New Yankee Workshop Workbench – Leveling and tray installation
I made the bench feet with some scrap 2x4 that I had leftover. This turned out to be a bad idea because it made the
New Yankee Workshop Workbench update – cutting the inserts out of the top
I cut the slot out of the benchtop for the dogs and tailstock. What a giant pain in the rear? Norm does it in the
New Yankee workbench update.
I got the benchtop all cut down to size and screwed together. I also cut the dado's and grooves for the rear tray. All I
New dado insert for my Skil 3410 table saw
I recently wrote an post on making a zero clearance insert plate for my table saw. The main reason that I made that insert was
New Yankee Workshop Workbench update – benchtop & tray parts
I made the benchtop out of 2 pieces of 1/2" plywood laminated together, cut the tray bottom to size and got the groves cut for the
New Yankee Workshop Workbench update – cutting the plywood benchtop
The plans called for making the benchtop out of 3/4" plywood. I've had this sheet of 1/2" plywood in my garage forever. I planned out
New Yankee Workshop workbench update
I was able to get quite a bit of work done on the bench this weekend. On Saturday I fixed all my dado mistakes and
I finally made some progress on the New Yankee Workshop workbench
I started the workbench build back at the beginning of the year by cutting all the 2x4's down to length. My wife bought me a